Weight |
42.8 kg |
Motor size |
150 |
Size |
710 mm |
Rotor surface |
Painted black |
Electronics housing material |
Die-cast aluminum, painted black |
Blade material |
Sheet aluminum insert, sprayed with PP plastic |
Fan housing material |
Sheet steel, pre-galvanized and coated with black plastic |
Guard grille material |
Steel, phosphated and coated with black plastic |
Number of blades |
5 |
Blade pitch |
0° |
Airflow direction |
V |
Direction of rotation |
Clockwise, viewed toward rotor |
Degree of protection |
IP55 |
Insulation class |
"F" |
Moisture (F) / Environmental (H) protection class |
H2 |
Max. permitted ambient temp. for motor (transport/storage) |
+ 80 °C |
Min. permitted ambient temp. for motor (transport/storage) |
- 40 °C |
Installation position |
Shaft horizontal or rotor on bottom; rotor on top on request |
Condensation drainage holes |
On rotor side |
Mode |
S1 |
Motor bearing |
Ball bearing |
Technical features |
- External 24 V input (parameter setting)
- RS-485 MODBUS-RTU
- PFC, passive
- Control input 0-10 VDC / PWM
- Thermal overload protection for electronics/motor
- Alarm relay
- Integrated PID controller
- Input for sensor 0-10 V or 4-20 mA
- Output for slave 0-10 V
- Motor current limitation
- Soft start
- Line undervoltage / phase failure detection
- Output 10 VDC, max. 10 mA
- Output 20 VDC, max. 50 mA |
EMC immunity to interference |
According to EN 61000-6-2 (industrial environment) |
EMC interference emission |
According to EN 61000-6-3 (household environment) |
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
Electrical hookup |
Terminal box |
Motor protection |
Reverse polarity and locked-rotor protection |
Protection class |
I (with customer connection of protective earth) |
Conformity with standards |
EN 61800-5-1 / CE |
Approval |
UL 1004-7 + 60730-1 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1 |